MTC test for Incoloy 901

US Incoloy 901 bar material shipments.(GE-standard)

MTC of Incoloy 901HY-industry successfully produced a batch of eight Incoloy 901 staihttps://hynickelalloy.com/wp-content/uploads/2019/05/test-for-901.jpgnless steel rods in accordance with GE specifications, and passed customer inspection and smooth delivery. The smooth delivery of this order marks the international advanced level of the gas turbine Incoloy 901 material produced by HY-industry.

NDT of Incoloy 901 bar Incoloy 901 bar machining

HY 901 Material grades and equivalents

Incoloy 901/ Alloy 901/USN N09901/W.Nr.2.466 NS/BS Nimonic901

HY 901 (UNS N09901/Din 1.4898)

HY 901 Chemical composition:

Alloy

%

Ni

Cu

Al

Fe

Ti

Co

Mn

S

C

Si

P

Cr

Mo

B

HY 901

Min.

40.0

2.35

11.0

5.0

0.01

Max.

45.0

0.50

0.35

Balance

3.10

1.0

1.0

0.03

0.10

0.60

0.03

14.0

7.0

0.02

HY 901 Physical properties:

Density

8.14 g/cm3

Melting point

1280-1345℃

HY 901 minimum mechanical properties in the room temperature:

Status

Tensile strength
Rm N/mm2

Yield strength
RP0.2N/mm2

Elongation
A5 %

HY 901

1034

689

12

Description
A nickel-iron-chromium alloy containing titanium and aluminum for precipitation hardening and molybdenum for solid-solution strengthening. The alloy has high yield strength and creep resistance at temperatures to about 1110°F (600°C). A subtantial iron content enables the alloy to combine high strength with good forging characteristics. Used in gas turbines for discs and shafts. Standard products form is round.

Corrosion Resistance
Alloy 901 has good corrosion resistance to the atmospheres normally found in jet engine operations. It has slightly lower scaling resistance than such alloy as Types 309 and 310 stainless steel.

Workability
Hot Working
Alloy 901 is forged between 2050°F (1121°C) and 1850°F (1010°C), metal temperature. Light hot work may be continued down to 1600°F (871°C) but not below. Metal temperature should not exceed 2050°F (1121°C) during rapid working. Billets should be charged into a hot furnace and heated rapidly through the precipitation hardening range.
Weldability
Alloy 901 can be welded by the inert-gas-arc method. It is difficult to weld. All welding should be done in the solution treated condition. Cold worked parts should be re-solution treated before welding. A re-solution treatment is recommended after welding before stabilizing and aging.

 

Specifications:

bar

AMS 5661/AMS 5660

forging/ring

AMS 5661

wire

AMS 5830

 

 

Regular shape for all kinds of alloys
Form Specification Supply Form Others
Sheet Thickness:0.40-4.75mm,General Width:1000、1219、1500mm Whole Coil or piece of it Cold Annealed,Surface 2B、2E
Plate Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) Whole Coil or piece of it Single hot rolling,Solid solution annealed state,Surface 1D
Belt Thickness:0.10-3.0mm,Width:50-500mm Whole Coil or Specified size Cold Annealed,Surface 2B、2E
Bar & Rod Rolled barΦ5-45mm,Length≤1500mm Polished Bar(circle、Square) Solution annealing,descaling
Forged barΦ26-245mm,Length≤4000mm
Weld tube Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm Base on your requirement
Seamless Tube Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm Base on your requirement
Wire Outer diameterΦ0.1-13mm Base on your requirement Ni & Ni alloy, Ti & Ti alloy
Forged piece discs,rings,squares,blocks,slabs Base on your requirement Steel, Alloy
Flangs All kinds of Flangs Base on your requirement Steel, Alloy
Welding Material Coil wire Φ0.025mm-1.6mm Base on your requirement Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.
Straight WireΦ1.6mm-4.0mm
Welding rodΦ1.2mm-4.0mm
Tube Elbow, three links, four links, different diameter size Base on your requirement Ni & Ni alloy, Ti & Ti alloy
Explosive bonded laminate Raw Sheet Thickness≥2mm Base on your requirement Ni & Ni alloy, Ti & Ti alloy

HY-industry is qualified  Nickelalloy&cobalt alloy materials supplier.

We have more than twenty years experience in kind of High temperature alloy production.

Monel 400,Stellite 6,Stellite 12,Incoloy 800ht,Nimonic 80A,Kovar,Invar 36,Inconel 625,Hastelloy C276, Incoloy 825 are mature productes of us.

When you want to know more about our products, please contact us:

https://hynickelalloy.com/