Nitronic 50

Short Introduction:

HY Nitronic 50/S20910/XM-19/ Fxm-19/Nitronic50 Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material.

    Description

    HY Nitronic 50/S20910/XM-19/ Fxm-19/Nitronic50

    HY Nitronic 50  Material grades and equivalents:

    UNS

    AISI/ASTM

    ID

    Trademark

    S20910

    XM-19

    Fxm-19

    Nitronic50

     HY Nitronic 50 Chemical composition:

    Alloy

    %

    Ni

    Cr

    Fe

    C

    Mn

    Si

    N

    Mo

    Nb

    V

    P

    S

    HY Nitronic 50

    Min.

    11.5

    20.5

    52

    4

    0.2

    1.5

    0.1

    0.1

    Max.

    13.5

    23.5

    62

    0.06

    6

    1

    0.4

    3

    0.3

    0.3

    0.04

    0.03

     HY Nitronic 50 Physical properties:

    Density

    7.8g/cm3

    Melting point

    1415-1450 °C

     HY Nitronic 50 Alloy mi nimum mechanical properties in the room temperature:

    Alloy status

    Tensile strength

    Rm N/mm²

    Yield strength

    RP0.2 N/mm²

    Elongation

    A5 %

    Brinell hardness

    HB

    Solution treatment

    690

    380

    35

    ≤241

     HY Nitronic 50 Characteristic:

    HY Nitronic 50 Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material. This austenitic stainless steel has corrosion resistance greater than that provided by types 316, 316L, 317, 317L plus approximately twice the yield strength at room temperature. In addition, HY Nitronic 50 has very good mechanical properties at both elevated and sub-zero temperatures unlike many austenitic stainless steel grades.

    HY Nitronic 50 does not become magnetic in cryogenic situations.

    High Strength (HS) Nitronic 50 has a yield strength about three times that of 316 Stainless Steel.

    HY Nitronic 50 Application field:

    Used in petroleum, petrochemical, manure, chemical, nuclear fuel recycle, paper making, textile and food processing industries parts of furnace, combustion chamber, gas turbine and heat-treating facility connecting piece

    Regular shape for all kinds of alloys

    Form

    Specification

    Supply Form

    Others

    Sheet

    Thickness:0.40-4.75mm,General Width:1000、1219、1500mm

    Whole Coil or piece of it

    Cold Annealed,Surface 2B、2E

    Plate

    Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled)

    Whole Coil or piece of it

    Single hot rolling,Solid solution annealed state,Surface 1D

    Belt

    Thickness:0.10-3.0mm,Width:50-500mm

    Whole Coil or Specified size

    Cold Annealed,Surface 2B、2E

    Bar & Rod

    Rolled barΦ5-45mm,Length≤1500mm

    Polished Bar(circle、Square)

    Solution annealing,descaling

    Forged barΦ26-245mm,Length≤4000mm

    Weld tube

    Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm

    Base on your requirement

    Seamless Tube

    Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm

    Base on your requirement

    Wire

    Outer diameterΦ0.1-13mm

    Base on your requirement

    Ni & Ni alloy, Ti & Ti alloy

    Forged piece

    discs,rings,squares,blocks,slabs

    Base on your requirement

    Steel, Alloy

    Flangs

    All kinds of Flangs

    Base on your requirement

    Steel, Alloy

    Welding Material

    Coil wire Φ0.025mm-1.6mm

    Base on your requirement

    Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.

    Straight WireΦ1.6mm-4.0mm

    Welding rodΦ1.2mm-4.0mm

    Tube

    Elbow, three links, four links, different diameter size

    Base on your requirement

    Ni & Ni alloy, Ti & Ti alloy

    Explosive bonded laminate

    Raw Sheet Thickness≥2mm

    Base on your requirement

    Ni & Ni alloy, Ti & Ti alloy