Machining conditions of hastelloy B.(HY-industry technical centre)
Knowledge of Hastelloy material:
Hastelloy is a high-priced special material, which is very impressive in people’s minds. However, Hastelloy can be designed and constructed just like stainless steel, so it is not necessary to consider it as a special material. Strong or reasonable design can increase the service life, and there are many examples where the cost is cheaper than stainless steel.
Recently, with the increase in people’s trust in equipment and the requirement for repair-free, the level of materials has also been continuously improved, and the proportion of Hastelloy has been increasing.
The machining of Hastelloy belongs to difficult-to-cut machining. Compared with stainless steel, it has more man-hours, but if the proper conditions are selected, this difference can be reduced.
HY-Industry summarizes many years of processing experience and has developed a form, which is now shared for your reference, hoping to help those in need.
Table of machining conditions for Hastelloy:
latheprocess |
Material |
Summary of HY technical department（standard） |
cuttingoil |
Machining Data Hand Book |
|||||||
cuttingdepthmm |
cuttingspeedm/min |
workingspeedmm/rev |
Tools |
cuttingdepthmm |
cuttingspeedm/min |
workingspeedmm/rev |
Tools |
||||
hastelloy B |
1.0~3.0 |
35~20 |
0.13~0.50 |
HTI-10,20 |
Insolubleoil |
0.8~2.5 |
30~21 |
0.13~0.40 |
HTI-10,20 |
||
hastelloy B-2 |
1.0~3.0 |
35~20 |
0.13~0.50 |
HTI-10,20 |
0.8~2.5 |
30~21 |
0.13~0.40 |
HTI-10,20 |
|||
hastelloy C |
1.0~3.0 |
35~20 |
0.13~0.50 |
HTI-10,20 |
0.8~2.5 |
30~21 |
0.13~0.40 |
HTI-10,20 |
|||
hastelloy C-276 |
1.0~3.0 |
35~20 |
0.13~0.50 |
HTI-10,20 |
0.8~2.5 |
30~21 |
0.13~0.40 |
HTI-10,20 |
|||
hastelloy C-4 |
1.0~3.0 |
35~20 |
0.13~0.50 |
HTI-10,20 |
0.8~2.5 |
30~21 |
0.13~0.40 |
HTI-10,20 |
|||
hastelloy C-22 |
1.0~3.0 |
35~20 |
0.13~0.50 |
HTI-10,20 |
0.8~2.5 |
30~21 |
0.13~0.40 |
HTI-10,20 |
|||
hastelloy G |
1.0~3.0 |
35~20 |
0.13~0.50 |
HTI-10,20 |
0.8~2.5 |
30~21 |
0.13~0.40 |
HTI-10,20 |
|||
hastelloy G-3 |
1.0~3.0 |
35~20 |
0.13~0.50 |
HTI-10,20 |
0.8~2.5 |
30~21 |
0.13~0.40 |
HTI-10,20 |
|||
hastelloy G-30 |
1.0~3.0 |
35~20 |
0.13~0.50 |
HTI-10,20 |
0.8~2.5 |
30~21 |
0.13~0.40 |
HTI-10,20 |
|||
Millingmachine processing |
Material |
Summary of HY technical department（standard） |
cutting oil |
Machining Data Hand Book |
|||||||
cutting depthmm |
cutting speedm/min |
working speedmm/rev |
Tools |
cutting depthmm |
cutting speedm/min |
working speedmm/rev |
Tools |
||||
hastelloy B |
1.0~3.0 |
25~20 |
0.10~0.20 |
HTI-10,20 |
· Insoluble oil |
1.0~4.0 |
21~20 |
0.13~0.15 |
HTI20,UTI20 |
||
hastelloy B-2 |
1.0~3.0 |
25~20 |
0.10~0.20 |
HTI-10,20 |
1.0~4.0 |
18~17 |
0.13~0.15 |
HTI20,UTI20 |
|||
hastelloy C |
1.0~3.0 |
25~20 |
0.10~0.20 |
HTI-10,20 |
1.0~4.0 |
21~20 |
0.13~0.15 |
HTI20,UTI20 |
|||
hastelloy C-276 |
1.0~3.0 |
25~20 |
0.10~0.20 |
HTI-10,20 |
1.0~4.0 |
21~20 |
0.13~0.15 |
HTI20,UTI20 |
|||
hastelloy C-4 |
1.0~3.0 |
25~20 |
0.10~0.20 |
HTI-10,20 |
1.0~4.0 |
21~20 |
0.13~0.15 |
HTI20,UTI20 |
|||
hastelloy C-22 |
1.0~3.0 |
25~20 |
0.10~0.20 |
HTI-10,20 |
1.0~4.0 |
21~20 |
0.13~0.15 |
HTI20,UTI20 |
|||
hastelloy G |
1.0~3.0 |
25~20 |
0.10~0.20 |
HTI-10,20 |
1.0~4.0 |
21~20 |
0.13~0.15 |
HTI20,UTI20 |
|||
hastelloy G-3 |
1.0~3.0 |
25~20 |
0.10~0.20 |
HTI-10,20 |
1.0~4.0 |
21~20 |
0.13~0.15 |
HTI20,UTI20 |
|||
hastelloy G-30 |
1.0~3.0 |
25~20 |
0.10~0.20 |
HTI-10,20 |
1.0~4.0 |
21~20 |
0.13~0.15 |
HTI20,UTI20 |
|||
