Alloy L605 Haynes 25 UNS R30605

Short Introduction:

HY 605;Udimet alloy L605;Alloy L605;Cobalt alloy L605; Haynes 25;UNS R30605 is useful in gas turbine applications such as rings,blades and combustion chamber parts (sheet fabrications) and can also can be used in industrial furnace applications such as muffles or liners in high temperature kilns

    Category:

    Description

    Alloy L605 Haynes 25 UNS R30605

    HY L605 Material grades and equivalents: Udimet alloy L605; Alloy L605; Cobalt alloy L605; Haynes 25; UNS R30605; KC20WN; WF-11; AIS1670; GH5605; HS25; 

    Introduction:

    HY L-605 is useful in gas turbine applications such as rings,blades and combustion chamber parts (sheet fabrications) and can also can be used in industrial furnace applications such as muffles or liners in high temperature kilns

    HY L605 is a solid solution strengthened cobalt-chromium-tungstennickel alloy with excellent high-temperature strength and excellent oxidation resistance to 2000°F (1093°C). The alloy also offers good resistance to sulfidation and resistance to wear and galling.

    HY L605 Chemical composition:

    Alloy

    %

    Cr

    Ni

    Co

    W

    C

    Fe

    Mn

    Si

    P

    S

    HY L605

    MIN

    19.0

    9.0

    14.0

    0.05

    1.0

    MAX

    21.0

    11.0

    Balance

    16.0

    0.15

    3.0

    2.0

    0.4

    0.04

    0.03

    HY L605 Physical properties:

    Density

    9.27 g/cm3

    Melting point

    1330℃-1410 ℃

    HY L605 sheet mechanical properties in the room temperature:

    Alloy Status

    Tensile strength

    Rm N/mm²

    Yield strengthRP0.2 N/mm²

    Elongation

    A5 %

    Solution Treatment

    980

    460

    50

    HY L605 Applications Fileds:

    HY L-605 is useful in gas turbine applications such as rings, blades and combustion chamber parts (sheet fabrications) and can also can be used in industrial furnace applications such as muffles or liners in high temperature kilns.

    HY L605 also used in the hot sections of aircrafts, parts for gas turbine engines, bearings, springs, and heart valve.

    L605 (UNS R30605) executive standard

    L605 (UNS R30605)

    sheet,Plate & Strip

    AMS 5537

    Billet,Rod & Bar

    AMS 5759

    MIL-C-24252D

    oated Electrodes

    AMS 5797

    Bare Welding Rods & Wire

    AMS 5796

    seamless Pipe & Tube

    Welded Pipe & Tube

    Fittings

    Forgings

    AMS 5759

    DIN

    others

    M1IL-R-5031B Class 13

    Regular shape for all kinds of alloys

    Form

    Specification

    Supply Form

    Others

    Sheet

    Thickness:0.40-4.75mm,General Width:1000、1219、1500mm

    Whole Coil or piece of it

    Cold Annealed,Surface 2B、2E

    Plate

    Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled)

    Whole Coil or piece of it

    Single hot rolling,Solid solution annealed state,Surface 1D

    Belt

    Thickness:0.10-3.0mm,Width:50-500mm

    Whole Coil or Specified size

    Cold Annealed,Surface 2B、2E

    Bar & Rod

    Rolled barΦ5-45mm,Length≤1500mm

    Polished Bar(circle、Square)

    Solution annealing,descaling

    Forged barΦ26-245mm,Length≤4000mm

    Weld tube

    Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm

    Base on your requirement

    Seamless Tube

    Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm

    Base on your requirement

    Wire

    Outer diameterΦ0.1-13mm

    Base on your requirement

    Ni & Ni alloy, Ti & Ti alloy

    Forged piece

    discs,rings,squares,blocks,slabs

    Base on your requirement

    Steel, Alloy

    Flangs

    All kinds of Flangs

    Base on your requirement

    Steel, Alloy

    Welding Material

    Coil wire Φ0.025mm-1.6mm

    Base on your requirement

    Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.

    Straight WireΦ1.6mm-4.0mm

    Welding rodΦ1.2mm-4.0mm

    Tube

    Elbow, three links, four links, different diameter size

    Base on your requirement

    Ni & Ni alloy, Ti & Ti alloy

    Explosive bonded laminate

    Raw Sheet Thickness≥2mm

    Base on your requirement

    Ni & Ni alloy, Ti & Ti alloy

    Shanghai HY Industry Co., Ltd has international first-class material production equipment such as high temperature alloy isothermal forging production line, CONSARC vacuum melting furnace, VAR vacuum arc remelting furnace etc., with strong professional ability and highly responsible management team. We are a member of China Application of nuclear energy materials, Member of the International Council of the Aeronautical Sciences,China Electronic Materials Industry Association Magnetic Materials Branch. Years of experience in special alloy. When you have superalloy material inquiry, please contact us without hesitation. Shanghai HY Industry Co., Ltd is Corrosion & fatigue nickel alloy professional manufacturer,We will provide you with sincere and thoughtful service.

    When you want to know more about our products, please contact us:

    https://hynickelalloy.com

      Your Country*

      Your Company*

      Your Name*

      Your Email*

      Your Message*