1J87 strip

NiFe Alloy 1J87

Short Introduction:

  • NiFe Alloy 1J87  is suitable for producing pulse transformer, high sensitive relay, magnetic amplifier, choke coil, etc.

    Category:

    Description

    NiFe Alloy 1J87

    NiFe Alloy 1J87

    1J87 soft magnetic alloy has good mechanical properties, including high toughness and high yield strength. It has good elastic and plastic deformation capabilities under stress. This alloy has a wide range of applications.

    Typical Chemical Composition：

    Material Grade Executive standard Chemical Composition（%）
    C S P Mn Si Ni Cr Co Mo Cu Nb Fe
    MAX
    1J87/Super-permalloy 0.03 0.02 0.02 0.-3-0.6 ≤0.3 78.5-80.5 – – 1.6-2.2 ≤0.26 6.5-7.5 余 Bla.

    1. Mechanical properties of 1J87 alloy:

    Hardness: 1J87 soft magnetic alloy has moderate hardness and is not easily deformed during processing, which can ensure the dimensional accuracy and surface quality of the product.

    Tensile strength: 1J87 soft magnetic alloy has high tensile strength and can withstand large tensile forces, allowing it to maintain structural stability when making parts with complex shapes.

    Toughness: 1J87 soft magnetic alloy has good toughness and can withstand certain deformation without cracking when subjected to external impact or vibration, ensuring the reliability and service life of the product.

    Wear resistance: 1J87 soft magnetic alloy has high wear resistance and can resist friction, wear and corrosion, ensuring its long-term stability under harsh working conditions.

    2. Application fields of 1J87 alloy:

    Electronic information field: 1J87 soft magnetic alloy can be used to manufacture sensors, magnetic heads, inductors, transformers and other components, and plays an important role in electronic equipment. Its high magnetic permeability and low hysteresis loss give it excellent performance in high-frequency electromagnetic fields.

    Electric power industry: 1J87 soft magnetic alloy is widely used in electrical equipment such as power transformers and inductors to improve energy transmission efficiency and reduce current loss.

    Aerospace field: 1J87 soft magnetic alloy can be made into filaments or sheets and is widely used in aerospace instruments. Its high saturation magnetic induction intensity and low hysteresis loss make it play a key role in spacecraft navigation, communications and other aspects.

    Automotive industry: 1J87 soft magnetic alloy can be made into induction coils, sensors and other components, which can be used in automotive electronic control systems to improve the performance and reliability of automotive electronic equipment.

    Medical device field: 1J87 soft magnetic alloy can be used in magnetic resonance imaging (MRI) systems in medical devices to generate stable magnetic fields, provide high-quality imaging data, and provide reliable support for clinical diagnosis.

    1J87 soft magnetic alloy has become one of the indispensable and important materials in modern industrial manufacturing due to its excellent mechanical properties. It plays an important role in many fields such as electronic information, electric power industry, aerospace, automobile industry and medical equipment, and promotes technological progress and industrial development in related fields.

    Wire Size and tolerance：

    Grade Executive standard Delivery status Wire rod size/accuracy  Thick wire size range/accuracy  Filament size range/accuracy
    Soft MagneticAlloy Grade GBn198-1988 Hard State（Y）

    ，Semi-hard State（Y2）Soft state (M)

    Ф8.0±0.6mm

    		 Ф5.85-9.0±0.5mm Ф1.00±0.0.02mm  Ф1.00-Ф1.5±0.03mm

    Strip product size and tolerance：

    GB/T15018-1994 GBn198-1988 GB/T14986-2008 Hard（Y）Soft（M） ＞0.04-0.09 0-0.01 20-250 –
    ＞0.09-0.15 0-0.02 20000
    ＞0.15-0.25 0-0.03 6000
    ＞0.25-0.40 0-0.04 30-300 3000
    ＞0.40-0.70 0-0.05
    ＞0.70-0.95 0-0.07 1000
    ＞0.95-1.35 0-0.08 80-300
    ＞1.35-1.75 0-0.11
    ＞1.75-2.30 0-0.13
    ＞2.30-3.00 0-0.16
    0.01mm.According to the requirements of the buyer, for strips with a thickness greater than or equal to 0.35 mm, strips with a width of more than 300 mm to 150 mm can be supplied, and their thickness deviations can be relaxed by 0.01 mm from the standard.

    Soft Magnetic Alloy：

    The use of soft magnetic alloys is very extensive. Because they are easy to magnetize and demagnetize, and have a high magnetic permeability, they can play a good role in gathering magnetic lines of force. Therefore, soft magnetic alloys are widely used as magnetic flux paths, ie, as magnetically conductive materials such as transformers and sensors. Cores, magnetic shields, yokes for special magnetic circuits, relays, transformers, magnetic amplifiers, electromagnetic clutches, automotive sensors, etc.

    Soft Magnetic Alloy ALLOY Grade Chemical composition，%
    C S P Mn Si Ni Cr Co Mo Cu Al Nb Fe 其它元素
    不大于（MAX）
    1J06 0.04 0.015 0.015 ≦0.10 ≦0.15 – – – – – 5.5～6.5 – 余 Bla. –
    1J12 0.03 0.015 0.015 ≦0.10 ≦0.15 – – – – – 11.6～12.4 余 Bla. –
    1J17 0.03 0.02 0.02 ≦0.60 ≦0.20 – 15.5～16.5 – – – – – 余 Bla. –
    1J18 0.03 0.02 0.02 0.3～0.7 ≦0.15 0.5～0.7 17～18.5 – – – – – 余 Bla. Ti，0.3-0.7
    1J22 0.04 0.02 0.02 ≦0.3 ≦0.3 ≤0.5 – 49～51 – ≤0.2 – – 余 Bla. V，0.8-1.8
    1J30 0.04 0.02 0.02 ≦0.40 ≦0.30 29.5～30.5 – – – – – – 余 Bla. –
    1J36 0.03 0.02 0.02 ≦0.60 ≦0.20 35.0～37.0 – – – – – – 余 Bla. –
    1J38 0.03 0.05 0.02 0.3～0.6 0.15～0.3 37.5～38.5 12.5～13.5 – – – – – 余 Bla. –
    1J46 0.03 0.02 0.02 0.6～1.1 0.15～0.3 45.0～46.5 – – – ≤0.2 – – 余 Bla. –
    1J50/HyRa50 0.03 0.02 0.02 0.3～0.6 0.15～0.3 49～50.5 – – – ≤0.2 – – 余 Bla. –
    1J51 0.03 0.02 0.02 0.3～0.6 0.15～0.3 49～50.5 – – – ≤0.2 – – 余 Bla. –
    1J54 0.03 0.02 0.02 0.3～0.6 1.1～1.4 49.5～51 3.8～4.2 – – ≤0.2 – – 余 Bla. –
    1J76 0.03 0.02 0.02 0.3～0.6 0.15～0.3 75.0～76.5 1.8～2.2 – – 4.8～5.2 – – 余 Bla. –
    1J77 0.03 0.02 0.02 0.3～0.6 0.15～0.3 75.5～78 – – 3.9～4.5 4.8～6.0 – – 余 Bla. –
    1J79/HyRa80/Alloy4 0.03 0.02 0.02 0.6～1.1 0.3～0.5 78.5～80.0 – – 3.8～4.1 ≤0.2 – – 余 Bla. –
    1J80 0.03 0.02 0.02 0.6～1.1 1.1～1.5 79.0～81.5 2.6-3.0 – – ≤0.2 – – 余 Bla. –
    1J85/Super-permalloy 0.03 0.02 0.02 0.3～0.6 0.15～0.3 79.0～81.0 – – 4.8-5.2 ≤0.2 – – 余 Bla. –
    1J87 0.03 0.02 0.02 0.3～0.6 ≦0.3 78.5～80.5 – – 1.6～2.2 – – 6.4～7.5 余 Bla. –

    Shanghai HY Industry Co., Ltd has international first-class material production equipment such as high temperature alloy isothermal forging production line, CONSARC vacuum melting furnace, VAR vacuum arc remelting furnace etc., with strong professional ability and highly responsible management team. We are a member of China Application of nuclear energy materials, Member of the International Council of the Aeronautical Sciences，China Electronic Materials Industry Association Magnetic Materials Branch. Years of experience in special alloy. When you have superalloy material inquiry, please contact us without hesitation. Shanghai HY Industry Co., Ltd is Corrosion & fatigue nickel alloy professional manufacturer,We will provide you with sincere and thoughtful service.

    When you want to know more about our products, please contact us:

    https://hynickelalloy.com

      Your Country*

      Your Company*

      Your Name*

      Your Email*

      Your Message*

      Related products