Nitronic 60

Short Introduction:

HY Nitronic 60/S21800/Alloy218 /XM-31/Nitronic 60 Stainless Steel provides a significantly lower cost way to fight galling and wear compared with cobalt-bearing and high nickel alloys. Its uniform corrosion resistance is better than type 304 in most media.

    Description

    HY Nitronic 60/S21800/Alloy218 /XM-31/Nitronic 60

    HY Nitronic 60  Material grades and equivalents:

    UNS

    AISI/ASTM

    S21800

    Alloy218

    HY Nitronic 60 Chemical composition:

    Alloy

    %

    Ni

    Cr

    Fe

    C

    Mn

    Si

    N

    P

    S

    HY Nitronic 60

    Min.

    8

    16

    59

    7

    3.5

    0.08

    Max.

    9

    18

    66

    0.1

    9

    4.5

    0.18

    0.04

    0.03

    HY Nitronic60 Physical properties:

    Density

    8.0g/cm3

    Melting point

    1375°C

    HY Nitronic 60 Alloy minimum mechanical properties in the room temperature:

    Alloy status

    Tensile strength

    Rm N/mm²

    Yield strength

    RP0.2 N/mm²

    Elongation

    A5 %

    Brinell hardness

    HB

    Solution treatment

    600

    320

    35

    ≤100

    HY Nitronic 60 Characteristic :

    HY Nitronic 60 Stainless Steel provides a significantly lower cost way to fight galling and wear compared with cobalt-bearing and high nickel alloys. Its uniform corrosion resistance is better than type 304 in most media. In HY Nitronic 60 ,chloride pitting is superior to Type 316.

    Yield strength at room temperature is nearly twice that of 304 and 316.

    HY Nitronic 60 provides excellent high temperature oxidation resistance and low-temperature impact resistance.

    HY Nitronic 60 Application field:
    Used extensively in the Power, Chemical, Petrochemical, Food and Oil & Gas industries with an array of uses including expansion joint wear plates, pump wear rings, bushings, process valve stems, seals and logging equipment.

    Regular shape for all kinds of alloys

    Form

    Specification

    Supply Form

    Others

    Sheet

    Thickness:0.40-4.75mm,General Width:1000、1219、1500mm

    Whole Coil or piece of it

    Cold Annealed,Surface 2B、2E

    Plate

    Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled)

    Whole Coil or piece of it

    Single hot rolling,Solid solution annealed state,Surface 1D

    Belt

    Thickness:0.10-3.0mm,Width:50-500mm

    Whole Coil or Specified size

    Cold Annealed,Surface 2B、2E

    Bar & Rod

    Rolled barΦ5-45mm,Length≤1500mm

    Polished Bar(circle、Square)

    Solution annealing,descaling

    Forged barΦ26-245mm,Length≤4000mm

    Weld tube

    Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm

    Base on your requirement

    Seamless Tube

    Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm

    Base on your requirement

    Wire

    Outer diameterΦ0.1-13mm

    Base on your requirement

    Ni & Ni alloy, Ti & Ti alloy

    Forged piece

    discs,rings,squares,blocks,slabs

    Base on your requirement

    Steel, Alloy

    Flangs

    All kinds of Flangs

    Base on your requirement

    Steel, Alloy

    Welding Material

    Coil wire Φ0.025mm-1.6mm

    Base on your requirement

    Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.

    Straight WireΦ1.6mm-4.0mm

    Welding rodΦ1.2mm-4.0mm

    Tube

    Elbow, three links, four links, different diameter size

    Base on your requirement

    Ni & Ni alloy, Ti & Ti alloy

    Explosive bonded laminate

    Raw Sheet Thickness≥2mm

    Base on your requirement

    Ni & Ni alloy, Ti & Ti alloy