hastelloy X pipe

UNS N06002 (Hastelloy X)

Short Introduction:

  • Hastelloy X / GB GH3536&GH536/UNS N06002 / SEW VDIUV W.Nr.2.4613 / AFNOR

  • NC22FeD has good oxidation and corrosion resistance. Below 900 °C with middle elevated temperature stress rupture and creep rupture strength; good formability with cold working and hot working and excellent welding fabrication.

    Category:

    Description

    Hastelloy X /UNS N06002

    Material grades and equivalents：

    Hastelloy X / GB GH3536&GH536/UNS N06002 / AFNOR NC22FeD/W.Nr. 2.4665/NiCr22Fe18Mo/NiCr21Fe18Mo9

    Hastelloy X Chemical compostion:

    %

    Ni

    Cr

    Fe

    C

    Mn

    Si

    Cu

    S

    B

    Ti

    P

    Co

    W

    Mo

    Al

    Min.

    Rest

    20.

    5

    17

    0.05

    0.5

    0.2

    8

    Max.

    23

    20

    0.15

    1

    1

    0.5

    0.015

    0.01

    0.15

    0.025

    2.5

    1

    10

    0.5

     Hastelloy X Physical properties:

    Density

    8.28 g/cm3

    Melting Point

    1295-1381℃

    HastelloyX performance advantages:

    •  It has excellent oxidation resistance up to 1200℃

    •  Good high temperature strength

    • Good formability and weldability

    • Good resistance to stress corrosion cracking

    HastelloyX Characteristic：

    • Good oxidation and corrosion resistance. Below 900 °C with middle elevated temperature stress rupture and creep rupture strength; good formability with cold working and hot working and excellent welding fabrication.

    HastelloyX welding process:

    • Hastelloy X can be welded by various welding processes, such as tungsten electrode inert gas arc welding, plasma arc welding, manual sub-arc welding, metal inert gas arc welding, and molten inert gas arc welding. Priority is given to pulse arc welding.

    • Before welding, the material needs to be solid solution treated to remove oxide scale, oil stains and various marking marks. The wide range of about 25mm on both sides of the weld needs to be polished to a bright metal surface.

    • Using low heat input, the temperature between layers does not exceed 100 ℃, without pre-welding and post-welding heat treatment.

    HastelloyX recommended welding materialsedit

    • GTAW/GMAW Nicrofer S 4722

    • W.-Nr. 2.4613

    • SG-NiCr21Fe18Mo

    • AWS A 5.14 ERNiCrMo-2

    • BS 2901 NA45

    • SMAW

    • AWS A 5.11 ENiCrMo-2

    Hastelloy X Applied field：

    • Industrial and aviation steam turbines (combustion chamber, rectifier, structural cover)

    • Industrial furnace parts, support rollers, grids, ribbons and radiant tubes

    • Spiral tube in petrochemical furnace

    • High temperature gas cooled nuclear reactor

    Specification：

     sheet/plate

    AMS 5536/GE B50T83/GE B50A436/ASME SB-435/ASTMB-435

    bar/Forging

    AMS 5754/GE B50A463

    Related products