hastelloy ring-1

Steam turbine combustion chamber hastelloy ring parts Ready for shipment to Russia

2018-11-21:After three months of waiting, our Russian customers are about to receive qualified parts urgently needed for steam turbine burners

HY HX Material grades and equivalents

Hastelloy X / GB GH3536&GH536/UNS N06002 / SEW VDIUV W.Nr.2.4613 / AFNOR NC22FeD

 HY HX
UNS Trademark W.Nr
N06002 HY HX 2.4613
HY HX Chemical compostion:
Alloy % Ni Cr Fe C Mn Si Cu S B Ti P Co W Mo Al
HY HX Min. balance 20.5 17 0.05 0.5 0.2 8
Max. 23 20 0.15 1 1 0.5 0.015 0.01 0.15 0.025 2.5 1 10 0.5
HY HX Physical properties:
Density 8.28 g/cm3
Melting Point 1295-1381 ℃

Hastelloy X Characteristic
Good oxidation and corrosion resistance. Below 900 °C with middle elevated temperature stress rupture and creep rupture strength; good formability with cold working and hot working and excellent welding fabrication.

Hastelloy X Applied field
Aero-engine combustion chamber and other parts used at elevated temperatures,long term usage below 900°C,short term usage temperature can reach 1080°C.

Specification

sheet/plate

AMS 5536/GE B50T83/GE B50A436/ASME SB-435/ASTM B-435

bar/Forging

AMS 5754/GE B50A463

 

Regular shape for all kinds of alloys
Form Specification Supply Form Others
Sheet Thickness:0.40-4.75mm,General Width:1000、1219、1500mm Whole Coil or piece of it Cold Annealed,Surface 2B、2E
Plate Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) Whole Coil or piece of it Single hot rolling,Solid solution annealed state,Surface 1D
Belt Thickness:0.10-3.0mm,Width:50-500mm Whole Coil or Specified size Cold Annealed,Surface 2B、2E
Bar & Rod Rolled barΦ5-45mm,Length≤1500mm Polished Bar(circle、Square) Solution annealing,descaling
Forged barΦ26-245mm,Length≤4000mm
Weld tube Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm Base on your requirement
Seamless Tube Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm Base on your requirement
Wire Outer diameterΦ0.1-13mm Base on your requirement Ni & Ni alloy, Ti & Ti alloy
Forged piece discs,rings,squares,blocks,slabs Base on your requirement Steel, Alloy
Flangs All kinds of Flangs Base on your requirement Steel, Alloy
Welding Material Coil wire Φ0.025mm-1.6mm Base on your requirement Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.
Straight WireΦ1.6mm-4.0mm
Welding rodΦ1.2mm-4.0mm
Tube Elbow, three links, four links, different diameter size Base on your requirement Ni & Ni alloy, Ti & Ti alloy
Explosive bonded laminate Raw Sheet Thickness≥2mm Base on your requirement Ni & Ni alloy, Ti & Ti alloy

HY-industry is qualified turbine parts supplier.We have more than 15 years experience in kind of turbine parts production.

When you want to know more about our products, please contact us:

https://hynickelalloy.com/product-center/