valve body-1

High temperature valve body completed for Turkey.(HY-marketing departmentes)

Turkish customer, place an order again, the ten-year cooperation process is already among you, me and you, and work together to create a glorious future.

This time is a batch of high-temperature valve seat orders, Monel 400 and Incoloy 901. Customers also purchased 200kg stellite welding wire, which are stellite-1, stellite-6 and stellite-190

HY M400 Material grades and equivalents

Monel 400/ Alloy400 /UNS N04400 / SEW VDIUV W.Nr.2.4360 NiCu30Fe /BS NA 12 / AFNOR Nu 30

HY M400 Chemical composition

      Alloy

%

Ni

Cu

Fe

C

Mn

Si

S

HY M400

Min.

63

28

Max.

34

2.5

0.3

2

0.5

0.024


HY M400 Physical properties

           Density

8.83 g/cm³

Melting point

1300-1390 ℃

HY M400 Alloy minimum mechanical properties in the room temperature

          Alloy state

Tensile strength
Rm N/mm²

Yield strength
R P0. 2 N/mm²

Elongation
A 5 %

HY M400

480

170

35

Characteristic as below:

  • HY M400 is an extremely combination property that use for largest amount and most widely corrosion resistance alloy. This alloy in the hydrofluoric acid and fluoride gas medium with excellent corrosion resistance, as well as to the hot concentrated alkali. At the same time, is also corrosion resistant to neutral solution, sea water, air, organic compounds. An important feature of this is generally do not generate a stress corrosion cracking, good cutting performance.

HY M400 Metallurgical structure

  • HY M400 alloy is high-intensity single-phase solid solution.

 

HY M400 Corrosion resistance

  • HY M400 alloy in the fluoride gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives have a very good corrosion resistance property, and possess better corrosion resistance more than the copper alloy in the sea water. Acid medium: HY M400have corrosion resistance in less than 85% consistency of sulfuric acid. HY M400is an important material that resistant to hydrofluoric acid. Water corrosion: HY M400 alloy in most corrosion cases of water, not only excellent corrosion resistance, but also less pitting, stress corrosion, the corrosion rate less than 0.025mm / a. High temperature corrosion: HY M400 for the work of the highest temperature at about 600 ℃ in general in the air, in the high temperature steam, the corrosion rate less than 0.026mm / a. Ammonia: HY M400 can be resistant to an hydrous ammonia and aminate conditions corrosion below 585 ℃ due to the high nickel.

HY M400 Application field:

HY M400 alloy is a multi-purpose material in many industrial applications:

  1.  Seamless water pipe in the power factory
  2. Sea-water exchanger and evaporator
  3. Sulfuric acid and hydrochloric acid environment
  4. Crude distillation
  5. Sea-water in the use of equipment and propeller shaft
  6. Nuclear industry and used in the manufacture of uranium enrichment isotope separation equipment
  7. Manufacturing hydrochloric acid equipment used in the production of pump and valve

 

Specification

Pipe Smls

Pipe Welded

Sheet/Plate

Bar

Forging

Fitting

Wire

B165/ B163

B725

B127

B164

B564

B366

 

Regular shape for all kinds of alloys
Form Specification Supply Form Others
Sheet Thickness:0.40-4.75mm,General Width:1000、1219、1500mm Whole Coil or piece of it Cold Annealed,Surface 2B、2E
Plate Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) Whole Coil or piece of it Single hot rolling,Solid solution annealed state,Surface 1D
Belt Thickness:0.10-3.0mm,Width:50-500mm Whole Coil or Specified size Cold Annealed,Surface 2B、2E
Bar & Rod Rolled barΦ5-45mm,Length≤1500mm Polished Bar(circle、Square) Solution annealing,descaling
Forged barΦ26-245mm,Length≤4000mm
Weld tube Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm Base on your requirement
Seamless Tube Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm Base on your requirement
Wire Outer diameterΦ0.1-13mm Base on your requirement Ni & Ni alloy, Ti & Ti alloy
Forged piece discs,rings,squares,blocks,slabs Base on your requirement Steel, Alloy
Flangs All kinds of Flangs Base on your requirement Steel, Alloy
Welding Material Coil wire Φ0.025mm-1.6mm Base on your requirement Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.
Straight WireΦ1.6mm-4.0mm
Welding rodΦ1.2mm-4.0mm
Tube Elbow, three links, four links, different diameter size Base on your requirement Ni & Ni alloy, Ti & Ti alloy
Explosive bonded laminate Raw Sheet Thickness≥2mm Base on your requirement Ni & Ni alloy, Ti & Ti alloy

 

High temperature valve body High temperature valve body High temperature valve body Hard sealing surface welding material